OpenStack

This repository provides all the support code required to deploy a "Developer Cloud".

OpenStack packages

The OpenStack packages are built by Linaro and made available in the following location:

http://repo.linaro.org/rpm/linaro-overlay/centos-7/repo

The build scripts for the packages are available in this repository on the openstack-venvs folder. These scripts are provided on as is basis, and they are tailored specifically for Linaro's building environment. Use only at your own risk.

Reference Architecture

The reference architecture deploys a cloud that uses Ceph as backend for OpenStack:

https://git.linaro.org/leg/sdi/openstack-ref-architecture.git

See block diagram of how the servers should be connected to the network and how to spread the services on the different hosts on a default configuration in the architecture document.

Pre-requisites

All the servers are supposed to have Linaro ERP 16.12 installed and they are supposed to have networking configured in a way that they can see/resolve each other's names.
The nodes that will be used as Ceph OSDs need to have at least one extra harddrive for Ceph.
The networking node should have 3 NICs connected as described in the architecture document.

Configuration

Some example configuration files are provided in this repo as example, go through them and generate the equivalent ones for your particular deployment:

ansible/hosts.example
group_vars/all

Ensure to use host names, instead of ips to avoid some known deployment issues.

The playbook assumes your own files are in a folder called ansible/secrets, so the recommendation is to place your files there.

The deployment

The deployment can be split in two different parts. Ceph and OpenStack.

Deploying Ceph

Monitors are deployed and the cluster bootstrapmd:

ansible-playbook -K -v -i ./hosts ./site.yml --tags ceph-mon

Check that the cluster is up and running by connecting to one of the monitors and checking:

ssh server1
ceph daemon mon.server1 mon_status

OSDs assume a full hard drive is dedicated to Ceph at least. A default configuration if all the servers that will be OSDs have the same HD layout can be spedified in group_vars/all as follows:

ceph_host_osds:
  - sbX
  - sbY
  - sbZ

If some server has a different configuration, this will be specified in the hostvars folder, in a file with the name of your server. For example:

$ cat hostvars/server1

ceph_host_osds:
  - sbZ
  - sbY

After configuring, the OSDs are deployed as follows:

ansible-playbook -K -v -i ./secrets/hosts ./site.yml --tags ceph-osd

2.1) In the case of setting up a cluster from scratch where ceph has been installed previously, there is an option to force the resetting of all the disks (this option WILL DELETE all the data on the OSDs). This option is not idempotent, use at your own risk. It is safe to use if you have cleanly deployed the machine and the disk to be used as OSD had a previously installed Ceph:

--extra-vars 'ceph_force_prepare=true'

Deploying OpenStack

OpenStack is deployed using Ansible with the playbook defined in the "ansible" directory. You'll need to create the files "deployment-vars" and "hosts" to match your environment. There are examples to help guide you. Once those files are in place, OpenStack can be deployed with:

ansible-playbook -K -v -i secrets/hosts site.yml

3.5 KiB Raw Blame History