Add initial models and corresponding test files

spec/fabricators/domain_fabricator.rb

@@ -0,0 +1,3 @@
+Fabricator(:domain) do
+  name { "#{Faker::Internet.domain_word}.ee" }
+end

spec/models/address_spec.rb

@@ -0,0 +1,6 @@
+require "rails_helper"
+
+describe Address do
+  it { should belong_to(:contact) }
+  it { should belong_to(:country) }
+end

spec/models/contact_spec.rb

@@ -0,0 +1,5 @@
+require "rails_helper"
+
+describe Contact do
+  it { should have_many(:addresses) }
+end

spec/models/domain_spec.rb

@@ -0,0 +1,14 @@
+require "rails_helper"
+
+describe Domain do
+  it { should belong_to(:registrar) }
+  it { should belong_to(:ns_set) }
+  it { should belong_to(:admin_contact) }
+  it { should belong_to(:owner_contact) }
+  it { should belong_to(:technical_contact) }
+
+  it 'creates a resource' do
+    d = Fabricate(:domain)
+    expect(d.name).to_not be_nil
+  end
+end

spec/models/nameserver_spec.rb

@@ -0,0 +1,5 @@
+require "rails_helper"
+
+describe Nameserver do
+  it { should have_and_belong_to_many(:ns_sets) }
+end

spec/models/ns_set_spec.rb

@@ -0,0 +1,6 @@
+require "rails_helper"
+
+describe NsSet do
+  it { should belong_to(:registrar)}
+  it { should have_and_belong_to_many(:nameservers) }
+end

spec/models/registrar_spec.rb

@@ -0,0 +1,7 @@
+require "rails_helper"
+
+describe Registrar do
+  it { should belong_to(:country) }
+  it { should have_many(:domains) }
+  it { should have_many(:ns_sets) }
+end

spec/models/right_spec.rb

@@ -0,0 +1,5 @@
+require "rails_helper"
+
+describe Right do
+  it { should have_and_belong_to_many(:roles) }
+end

spec/models/role_spec.rb

@@ -0,0 +1,5 @@
+require "rails_helper"
+
+describe Role do
+  it { should have_and_belong_to_many(:rights) }
+end

spec/models/user_spec.rb

@@ -0,0 +1,5 @@
+require "rails_helper"
+
+describe User do
+  it { should belong_to(:role) }
+end

spec/rails_helper.rb

@@ -0,0 +1,48 @@
+# This file is copied to spec/ when you run 'rails generate rspec:install'
+ENV["RAILS_ENV"] ||= 'test'
+require 'spec_helper'
+require File.expand_path("../../config/environment", __FILE__)
+require 'rspec/rails'
+require 'shoulda/matchers'
+
+# Requires supporting ruby files with custom matchers and macros, etc, in
+# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
+# run as spec files by default. This means that files in spec/support that end
+# in _spec.rb will both be required and run as specs, causing the specs to be
+# run twice. It is recommended that you do not name files matching this glob to
+# end with _spec.rb. You can configure this pattern with with the --pattern
+# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
+Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
+
+# Checks for pending migrations before tests are run.
+# If you are not using ActiveRecord, you can remove this line.
+ActiveRecord::Migration.maintain_test_schema!
+
+RSpec.configure do |config|
+  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
+  config.fixture_path = "#{::Rails.root}/spec/fixtures"
+
+  # If you're not using ActiveRecord, or you'd prefer not to run each of your
+  # examples within a transaction, remove the following line or assign false
+  # instead of true.
+  config.use_transactional_fixtures = true
+
+  # RSpec Rails can automatically mix in different behaviours to your tests
+  # based on their file location, for example enabling you to call `get` and
+  # `post` in specs under `spec/controllers`.
+  #
+  # You can disable this behaviour by removing the line below, and instead
+  # explicitly tag your specs with their type, e.g.:
+  #
+  #     RSpec.describe UsersController, :type => :controller do
+  #       # ...
+  #     end
+  #
+  # The different available types are documented in the features, such as in
+  # https://relishapp.com/rspec/rspec-rails/docs
+  config.infer_spec_type_from_file_location!
+
+  config.expect_with :rspec do |c|
+    c.syntax = :expect
+  end
+end

spec/spec_helper.rb

@@ -0,0 +1,78 @@
+# This file was generated by the `rails generate rspec:install` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause this
+# file to always be loaded, without a need to explicitly require it in any files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, make a
+# separate helper file that requires this one and then use it only in the specs
+# that actually need it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # Enable only the newer, non-monkey-patching expect syntax.
+    # For more details, see:
+    #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
+    expectations.syntax = :expect
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Enable only the newer, non-monkey-patching expect syntax.
+    # For more details, see:
+    #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+    mocks.syntax = :expect
+
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended.
+    mocks.verify_partial_doubles = true
+  end
+=end
+end