All domain/host names should be stored in their canonical forms (puny-
coded and lower-cased). This validation is already in the flows, but
this adds protection against bad data from other sources, e.g. admin
consoles or RDE imports.
This also removes an old work-around that temporarily suspended this
validation for superusers, because we used to have non-canonicalized
data in the system. The non-canonicalized data has since all been
cleaned up, so this work-around is no longer necessary.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=146799558
This is probably best from a code-cleanliness perspective anyways,
but the rationale is that tightly coupling the resources to the
info responses was a straightjacket that required all status
values and fields to be directly available on the resource. With
this change, I already was able to get rid of the preMarshal()
hackery, and I will be able to get rid of cloneWithLinkedStatus()
and most of the contents of cloneProjectedAtTime() for non-domains.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=144252924
I'm setting it to three buckets across all tests, because the default one bucket
wasn't realistic enough, and allowed some tests to pass that shouldn't have,
essentially by accident.
This also changes RegistryConfig from being an interface to being an abstract
base class. The medium term goal here is to have it be a static class so that it
can provide fields from the YAML-derived POJO in situations where Dagger
injection isn't feasible.
The expected end state is as follows:
default-config.yaml -- The master config file that provides defaults for all
values.
nomulus-config.yaml -- A per-environment config file that overrides the defaults
from the previous file.
YamlConfig.java -- The POJO that the aforementioned YAML files are deserialized
into.
RegistryConfig.java -- Contains a static, memoized instance of YamlConfig and
provides static methods for getting some of those values.
ConfigModule -- Will become a static inner class of RegistryConfig, using Dagger
to provide most of the fields from the memoized YamlConfig instance. This way,
all configuration will be coming from a single place: RegistryConfig.java.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=143567288
HostResource and DomainApplication are not transferable, (or at
least, not directly in the case of hosts) and have no need for
the TransferData field. In a flat-flow world, we can push it down
to where it's actually used.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=139201423
This is the third and final phase in the migration away from ReferenceUnions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=138778148
This is the second phase of a three phase migration to remove
ReferenceUnions. As of the end of this phase, ReferenceUnions are no longer read
from in any active code paths, but are still written to in case a rollback to
the previous version is necessary. The third and final phase will remove the
ReferenceUnions entirely.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=137951076
This concludes your flow flattening experience. Please
fill out a flow flattening satisfaction survey before
exiting.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=137903095
*** Reason for rollback ***
This code is fine, and I will be resurrecting it unaltered next week. It's only being rolled back for operational reasons related to the timing of our internal pushes.
*** Original change description ***
Switch over to non-ReferenceUnion fields on DomainBase
This is the second phase of a three phase migration to remove
ReferenceUnions. As of the end of this phase, ReferenceUnions are no longer read
from in any active code paths, but are still written to in case a rollback to
the previous version is necessary. The third and final phase will remove the
ReferenceUnions entirely.
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=136642759
This is the second phase of a three phase migration to remove
ReferenceUnions. As of the end of this phase, ReferenceUnions are no longer read
from in any active code paths, but are still written to in case a rollback to
the previous version is necessary. The third and final phase will remove the
ReferenceUnions entirely.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=136388057
It is important to get at least this one commit in before the public Nomulus
release so that none of our public users will have to go through this data
migration (although we will have to).
The migration strategy is as follows:
1. Dual-write to non-ReferenceUnion fields in addition to the current
ReferenceUnion fields in use, and add new indexes (this commit). Deploy.
2. Run the ResaveAllEppResourcesAction backfill [].
3. Switch all code over to using the new fields. Dual-write is still in effect,
except it is now copying over the values of the new fields to the old
fields. Switch over all BigQuery reporting scripts to use the new
fields. Deploy.
4. Remove all of the old code and indexes. Deploy.
5. (Optional, at our leisure) Re-run the ResaveAllEppResourcesAction backfill
[] to delete the old obsolete fields.
Note that this migration strategy is rollback-safe at every step -- new data is
not read until it has already been written out in the previous step, and old
data is not removed immediately following a step in which it was still being
read, so the previous step is safe to roll back to.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=136196988
There was a circular reference when hydrating a domain with a
subordinate host, since the host references the domain. To fix
this, I redid @DoNotHydrate to be the way it should have been,
rather than the hack I had originally submitted. I also beefed
up the unit tests of the epp resource types to check for cycles.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=135792416
It is replaced by loadByForeignKey(), which does the same thing that
loadByUniqueId() did for contacts, hosts, and domains, and also
loadDomainApplication(), which loads domain application by ROID. This eliminates
the ugly mode-switching of attemping to load by other foreign key or ROID.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=133980156
This change replaces all Ref objects in the code with Key objects. These are
stored in datastore as the same object (raw datastore keys), so this is not
a model change.
Our best practices doc says to use Keys not Refs because:
* The .get() method obscures what's actually going on
- Much harder to visually audit the code for datastore loads
- Hard to distinguish Ref<T> get()'s from Optional get()'s and Supplier get()'s
* Implicit ofy().load() offers much less control
- Antipattern for ultimate goal of making Ofy injectable
- Can't control cache use or batch loading without making ofy() explicit anyway
* Serialization behavior is surprising and could be quite dangerous/incorrect
- Can lead to serialization errors. If it actually worked "as intended",
it would lead to a Ref<> on a serialized object being replaced upon
deserialization with a stale copy of the old value, which could potentially
break all kinds of transactional expectations
* Having both Ref<T> and Key<T> introduces extra boilerplate everywhere
- E.g. helper methods all need to have Ref and Key overloads, or you need to
call .key() to get the Key<T> for every Ref<T> you want to pass in
- Creating a Ref<T> is more cumbersome, since it doesn't have all the create()
overloads that Key<T> has, only create(Key<T>) and create(Entity) - no way to
create directly from kind+ID/name, raw Key, websafe key string, etc.
(Note that Refs are treated specially by Objectify's @Load method and Keys are not;
we don't use that feature, but it is the one advantage Refs have over Keys.)
The direct impetus for this change is that I am trying to audit our use of memcache,
and the implicit .get() calls to datastore were making that very hard.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=131965491
This will improve error messages and allow for easier debugging
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123893831
This is true even though the domain has three fields (a contact,
a host, and the registrant) whose foreign keys need to be loaded.
This CL also adds the generic ability to do these sort of tests
elsewhere in the code, by instrumenting the datastore instance
used by Objectify to store static counts of method calls.
TESTED=patched in a rollback of [] and confirmed that the
test failed because there were three reads.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123885768
ReferenceUnion is a hack to work around the mismatch between how
we store references (by roid) and how they are represented in EPP
(by foreign key). If it ever needed to exist (not entirely clear...)
it should have remained tightly scoped within the domain commands
and resources. Instead it has leaked everywhere in the project,
causing lots of boilerplate. This CL hides all of that behind
standard Refs, and should be followed by work to remove ReferenceUnion
completely.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=122424416
The dark lord Gosling designed the Java package naming system so that
ownership flows from the DNS system. Since we own the domain name
registry.google, it seems only appropriate that we should use
google.registry as our package name.
This change renames directories in preparation for the great package
rename. The repository is now in a broken state because the code
itself hasn't been updated. However this should ensure that git
correctly preserves history for each file.
2016-05-13 18:55:08 -04:00
Renamed from javatests/com/google/domain/registry/model/domain/DomainResourceTest.java (Browse further)
