Stream.concat only accepts 2 parameters. Streams.concat on the other hand
accepts any number of parameters.
Moving to Streams.concat for all uses (2 or more) makes sense for uniformity
and convenience reasons.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179716648
Last commit did not pick up all the changes because MOE incorrectly attributed some changes to the wrong commit. This commit should reconcile these. Also picked up some changes to how hamcrest library is depended upon in BUILD file, which should have been included in previous commits.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=177637931
They can be inferred correctly even in Java 7, and display as
compiler warnings in IntelliJ.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=173451087
This was a surprisingly involved change. Some of the difficulties included
java.util.Optional purposely not being Serializable (so I had to move a
few Optionals in mapreduce classes to @Nullable) and having to add the Truth
Java8 extension library for assertion support.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=171863777
It makes sense for all mapreduces to run in backend, especially onces
that are scheduled regularly to run in cron like this one now. We don't
have many instances configured for the tools service anymore on some
of our environments, so backend is the friendliest place for a mapreduce
to run.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=168882122
We're planning on adding a cronjob to run this mapreduce monthly, so
we may as well also project the resources being re-saved to the present
time so as to handle pending transfers, grace periods, and such. This will
make the BigQuery exports more useful.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=168831056
This pattern will mainly be used for data migrations, i.e. updating all
HistoryEntries' DomainTransactionRecords to the new schema.
TESTED=Ran in alpha, the underlying data dropped non-Objectify fields as
expected.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=168684356
This is the first in a series of CLs containing code from an old CL of Dai's that had never been completed, which compares zone data between Datastore and DNS. I had written a script to do this by calling two nomulus commands, but maybe it can be done directly in Java, which would be convenient.
This CL is just the plumbing to check on the status of a Mapreduce. We will need this to know that we can proceed with the next step of comparing the output to the DNS data.
Cloned from CL 134295050 by 'g4 patch'.
Original change by dxy@dxy:zoneman-reader:1939:citc on 2016/09/26 10:34:22.
Add a command for comparing zone data between DNS and datastore
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=167188979
To log autorenews, we currently run a mapreduce daily that creates synthetic
billing events for each recurring event past its due time. These are all
parented under the original recurring event, which allows these synthetic events to incorrectly stack on the original mutating entry.
We now explicitly create a new HistoryEntry of type DOMAIN_AUTORENEW to log
autorenews alongside other mutating EPP flows. These also parent DomainTransactionRecords for the NET_RENEWS_1_YEAR field, with the reporting time equal to the billing time (which accounts for the autorenew grace period).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166379700
In standard DNS format, the first thing on an A, NS or DS definition line is a domain label relative to the zone, which in our case is a TLD. However, the generate_zone_files command prints out fully qualified host and domain names, resulting in a discrepancy when compared to the contents of the DNS subsystem. This CL removes the TLD suffix, which should remove one preprocessing step before file comparison.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166103705
Previously, GenerateZoneFilesAction mapreduced its way through all domains and hosts for the specified TLD(s), emitting information for each matching domain and host (subject to constraints like not being deleted and so on). This resulted in host information (aka glue records) for all hosts subordinate to domains in the specified TLD(s). This is incorrect. DNS glue records should only be present for hosts which act as nameservers for their superordinate domains.
The new version of the mapreduce iterates only over domains. When a matching domain is found, a check is made to see whether any subordinate hosts are also nameservers for the domain, in which case host information is generated.
The test was updated to reflect the new reality, and check for a couple additional nuances.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=165766472
Attending to this old bug will improve our ability to perform zone comparisons between Datastore and the DNS provider. Right now, zone comparison finds some bogus differences, because the TTL we send to the DNS subsystem doesn't match the TTL we use when generating our local dump files.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=164635557
This makes the code more understandable from callsites, and also forces
users of this function to deal with the situation where the registrar
with a given client ID might not be present (it was previously silently
NPEing from some of the callsites).
This also adds a test helper method loadRegistrar(clientId) that retains
the old functionality for terseness in tests. It also fixes some instances
of using the load method with the wrong cachedness -- some uses in high-
traffic situations (WHOIS) that should have caching, but also low-traffic
reporting that don't benefit from caching so might as well always be
current.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=162990468
We want to be safer and more explicit about the authentication needed by the many actions that exist.
As such, we make the 'auth' parameter required in @Action (so it's always clear who can run a specific action) and we replace the @Auth with an enum so that only pre-approved configurations that are aptly named and documented can be used.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=162210306
This will allow us to migrate one TLD at a time by refreshing all zones
on the specified TLD after dual-writing is enabled.
Note that the TLDs parameter is required, which seems reasonable given
that almost all imagined use cases would be on a by-TLD basis.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=160294546
I'm moving it out of the scrap folder too because there's nothing else
in there and we do want to retain this indefinitely because it's a useful
tool for performing DNS writer migrations.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=160168902
Memcache is already off but now it's not in the code anymore.
This includes removing domain creation failfast, since that is actually
slower now than just running the flow - all you gain is a non-transactional
read over a transactional read, but the cost is that you always pay that
read, which is going to drive up latency.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=158183506
This brings the affected actions into line with the settings on other similar actions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=157259842
This is better than calling assertTldExists() inside a for loop because you can throw a single exception reporting all bad TLDs at once rather than only getting as far as the first failure. And then it's also a one-liner instead of 3 lines.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=152412876
The code to authenticate and authorize incoming requests (including via OAuth) has been in the system. This CL actually turns it on, since we are satisfied from logging information that it is not unjustly denying access.
Auth settings are also updated on a few commands missed earlier.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=152381820
A test has been added to RequestHandlerTest, making sure that, while we merely log errors for the time being, the correct dummy AuthResult is being created.
Most actions use the default settings, which have been changed to INTERNAL / APP / IGNORED. Actions with non-default settings are:
INTERNAL/NONE/PUBLIC (non-auth public endpoints)
CheckApiAction
WhoisHttpServer
Rdap*Action
INTERNAL,API/APP/ADMIN (things currently protected by web.xml)
EppTlsAction
EppToolAction
CreateGroupsAction
CreatePremiumListAction
DeleteEntityAction
List*sAction
UpdatePremiumListAction
VerifyOteAction
WhoisServer
INTERNAL,API,LEGACY/USER/PUBLIC (registrar console)
RegistrarPaymentAction
RegistrarPaymentSetupAction
RegistrarSettingsAction
EppConsoleAction
INTERNAL,API,LEGACY/NONE/PUBLIC (registrar console main page)
ConsoleUiAction
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=149761652
It was kind of messy having all of that logic living alongside the
entities themselves.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=148498024
This also cleans up the PremiumList API so that it only has one
method for checking premium prices, which is by TLD, rather than two.
I will be refactoring a lot of the static methods currently residing in
the PremiumList class into a separate utils class, but I don't want to
include too many changes in this one CL.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=148475345
This fixes a bug in the interaction between ListObjectsAction and ListObjectsCommand/AppEngineConnection. ListObjectsAction was returning HTTP status code 400 when it caught an IAE, but also attempting to return a JSON response payload of {"status": "error", "error": "<exception message>"}. However, AppEngineConnection treats any HTTP error response as more like a crash on the server side - it attempts to scrape the error message out of the autogenerated HTML that AppEngine produces for uncaught exceptions, and throws an exception, killing ListObjectsCommand before it can extract the JSON which contains the nicer error (that stating the missing field, etc versus just "400 Bad Request").
The fix is just to have ListObjectsAction return a 200 and the error message so that ListObjectsCommand can correctly handle it.
I also de-scoped the catch to only catching IAE, since catching Exception was overbroad, and the only "expected" exception to be thrown is an IAE from the checkArgument() that tests if the requested fields all exist. Any other kinds of exceptions should actually just bubble up and kill the action, and get the regular AppEngineConnection error treatment.
I also added "billingId" as an alias for "billingIdentifier", parallel to clientId/clientIdentifier, since that's why I came across this issue in the first place.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=148248834
Effectively a revert of [] now that synthetic billing events have been verified in production.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=144473744
This is the final preparatory step necessary in order to load and load
configuration from YAML in a static context and then provide it either via
Dagger (using ConfigModule) or through RegistryConfig's existing static
functions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=143819983
This is temporary until we verify that recurring billing event expansion is working as expected. I want to have this available in case things go south, though in a perfect world, we won't need this.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=143693458
We're now using java_import_external instead of maven_jar. This allows
us to specify the relationships between jars, thereby allowing us to
eliminate scores of vendor BUILD files that did nothing but re-export
@foo//jar targets, thus addressing the concerns of djhworld on Hacker
News: https://news.ycombinator.com/item?id=12738072
We now have redundant failover mirrors, which is a feature I added to
Bazel 0.4.2 in ed7ced0018
A new standard naming convention is now being used for all Maven repos.
Those names are calculated from the group_artifact name using the
following algorithm that eliminates redundancy:
https://gist.github.com/jart/41bfd977b913c2301627162f1c038e55
The JSR330 dep has been removed from java targets if they also depend
on Dagger, since Dagger always exports JSR330.
Annotation processor dependencies should now be leaner and meaner, by
more appropriately managing what needs to be on the classpath at
runtime. This should trim down the production jar by >1MB. As it stands
currently in the open source world:
- backend_jar_deploy.jar: 50MB
- frontend_jar_deploy.jar: 30MB
- tools_jar_deploy.jar: 45MB
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=143487929
This makes the associated nomulus tool commands correctly return error
exit codes when the server-side component fails. This improves
scriptability.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=140543216
This prevents a potential blind write scenario in which something else has concurrently modified the EppResource in between load and save, and those changes then get overwritten.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=138911873
