Attending to this old bug will improve our ability to perform zone comparisons between Datastore and the DNS provider. Right now, zone comparison finds some bogus differences, because the TTL we send to the DNS subsystem doesn't match the TTL we use when generating our local dump files.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=164635557
This makes the code more understandable from callsites, and also forces
users of this function to deal with the situation where the registrar
with a given client ID might not be present (it was previously silently
NPEing from some of the callsites).
This also adds a test helper method loadRegistrar(clientId) that retains
the old functionality for terseness in tests. It also fixes some instances
of using the load method with the wrong cachedness -- some uses in high-
traffic situations (WHOIS) that should have caching, but also low-traffic
reporting that don't benefit from caching so might as well always be
current.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=162990468
We want to be safer and more explicit about the authentication needed by the many actions that exist.
As such, we make the 'auth' parameter required in @Action (so it's always clear who can run a specific action) and we replace the @Auth with an enum so that only pre-approved configurations that are aptly named and documented can be used.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=162210306
This will allow us to migrate one TLD at a time by refreshing all zones
on the specified TLD after dual-writing is enabled.
Note that the TLDs parameter is required, which seems reasonable given
that almost all imagined use cases would be on a by-TLD basis.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=160294546
I'm moving it out of the scrap folder too because there's nothing else
in there and we do want to retain this indefinitely because it's a useful
tool for performing DNS writer migrations.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=160168902
Memcache is already off but now it's not in the code anymore.
This includes removing domain creation failfast, since that is actually
slower now than just running the flow - all you gain is a non-transactional
read over a transactional read, but the cost is that you always pay that
read, which is going to drive up latency.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=158183506
This brings the affected actions into line with the settings on other similar actions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=157259842
This is better than calling assertTldExists() inside a for loop because you can throw a single exception reporting all bad TLDs at once rather than only getting as far as the first failure. And then it's also a one-liner instead of 3 lines.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=152412876
The code to authenticate and authorize incoming requests (including via OAuth) has been in the system. This CL actually turns it on, since we are satisfied from logging information that it is not unjustly denying access.
Auth settings are also updated on a few commands missed earlier.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=152381820
A test has been added to RequestHandlerTest, making sure that, while we merely log errors for the time being, the correct dummy AuthResult is being created.
Most actions use the default settings, which have been changed to INTERNAL / APP / IGNORED. Actions with non-default settings are:
INTERNAL/NONE/PUBLIC (non-auth public endpoints)
CheckApiAction
WhoisHttpServer
Rdap*Action
INTERNAL,API/APP/ADMIN (things currently protected by web.xml)
EppTlsAction
EppToolAction
CreateGroupsAction
CreatePremiumListAction
DeleteEntityAction
List*sAction
UpdatePremiumListAction
VerifyOteAction
WhoisServer
INTERNAL,API,LEGACY/USER/PUBLIC (registrar console)
RegistrarPaymentAction
RegistrarPaymentSetupAction
RegistrarSettingsAction
EppConsoleAction
INTERNAL,API,LEGACY/NONE/PUBLIC (registrar console main page)
ConsoleUiAction
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=149761652
It was kind of messy having all of that logic living alongside the
entities themselves.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=148498024
This also cleans up the PremiumList API so that it only has one
method for checking premium prices, which is by TLD, rather than two.
I will be refactoring a lot of the static methods currently residing in
the PremiumList class into a separate utils class, but I don't want to
include too many changes in this one CL.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=148475345
This fixes a bug in the interaction between ListObjectsAction and ListObjectsCommand/AppEngineConnection. ListObjectsAction was returning HTTP status code 400 when it caught an IAE, but also attempting to return a JSON response payload of {"status": "error", "error": "<exception message>"}. However, AppEngineConnection treats any HTTP error response as more like a crash on the server side - it attempts to scrape the error message out of the autogenerated HTML that AppEngine produces for uncaught exceptions, and throws an exception, killing ListObjectsCommand before it can extract the JSON which contains the nicer error (that stating the missing field, etc versus just "400 Bad Request").
The fix is just to have ListObjectsAction return a 200 and the error message so that ListObjectsCommand can correctly handle it.
I also de-scoped the catch to only catching IAE, since catching Exception was overbroad, and the only "expected" exception to be thrown is an IAE from the checkArgument() that tests if the requested fields all exist. Any other kinds of exceptions should actually just bubble up and kill the action, and get the regular AppEngineConnection error treatment.
I also added "billingId" as an alias for "billingIdentifier", parallel to clientId/clientIdentifier, since that's why I came across this issue in the first place.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=148248834
Effectively a revert of [] now that synthetic billing events have been verified in production.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=144473744
This is the final preparatory step necessary in order to load and load
configuration from YAML in a static context and then provide it either via
Dagger (using ConfigModule) or through RegistryConfig's existing static
functions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=143819983
This is temporary until we verify that recurring billing event expansion is working as expected. I want to have this available in case things go south, though in a perfect world, we won't need this.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=143693458
We're now using java_import_external instead of maven_jar. This allows
us to specify the relationships between jars, thereby allowing us to
eliminate scores of vendor BUILD files that did nothing but re-export
@foo//jar targets, thus addressing the concerns of djhworld on Hacker
News: https://news.ycombinator.com/item?id=12738072
We now have redundant failover mirrors, which is a feature I added to
Bazel 0.4.2 in ed7ced0018
A new standard naming convention is now being used for all Maven repos.
Those names are calculated from the group_artifact name using the
following algorithm that eliminates redundancy:
https://gist.github.com/jart/41bfd977b913c2301627162f1c038e55
The JSR330 dep has been removed from java targets if they also depend
on Dagger, since Dagger always exports JSR330.
Annotation processor dependencies should now be leaner and meaner, by
more appropriately managing what needs to be on the classpath at
runtime. This should trim down the production jar by >1MB. As it stands
currently in the open source world:
- backend_jar_deploy.jar: 50MB
- frontend_jar_deploy.jar: 30MB
- tools_jar_deploy.jar: 45MB
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=143487929
This makes the associated nomulus tool commands correctly return error
exit codes when the server-side component fails. This improves
scriptability.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=140543216
This prevents a potential blind write scenario in which something else has concurrently modified the EppResource in between load and save, and those changes then get overwritten.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=138911873
I added shared base classes to all of the Fee extension types that
make it possible to fully ignore the version in the flows. (You
ask for a FeeCreateCommandExtension, for example, and you get one
without having to worry about which). This is an improvement over
the old code that asked you to provide a list of possible fee
extensions and then ask for the first one in preference order.
As part of this I was able to make the Fee implementation a bit
simpler as well.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=137992390
This allows separate Bazel projects to reference Nomulus as an external
repository. They can then copy the []
directory structure into their own project and customize the Action
and Module lists for the GAE modules in their own deployment.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=136863886
It's provided in ToolsRequestComponent, so it absolutely should be running on
the tools service. This was just a flat-out bug.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=136630743
This changes everything with external visibility beyond the codebase
(i.e. the name of the compiled binary and the documentation that refers
to it). It does not change a lot of things internal to the codebase,
i.e. the "RegistryTool" class didn't change its name. We can rename that
in a subsequent CL if we want to.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=135022087
Also creates a new package named 'batch' to house it.
TESTED=I deployed it to alpha, sent a POST request to the task URL, and it
successfully ran the [].
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=134332999
The default is to support GET, which doesn't work with cron fanout which only
uses POST.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=134284855
It's best to be consistent and use the same thing everywhere. "clientId" was
already used in more places and is shorter and no more ambiguous, so it's the
logical one to win out.
Note that this CL is almost solely a big Eclipse-assisted refactoring. There are
two places that I did not change clientIdentifier -- the actual entity field on
Registrar (though I did change all getters and setters), and the name of a
column on the exported registrar spreadsheet. Both would require data
migrations.
Also fixes a few minor nits discovered in touched files, including an incorrect
test in OfyFilterTest.java and some superfluous uses of String.format() when
calling checkArgument().
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=133956465
This change replaces all Ref objects in the code with Key objects. These are
stored in datastore as the same object (raw datastore keys), so this is not
a model change.
Our best practices doc says to use Keys not Refs because:
* The .get() method obscures what's actually going on
- Much harder to visually audit the code for datastore loads
- Hard to distinguish Ref<T> get()'s from Optional get()'s and Supplier get()'s
* Implicit ofy().load() offers much less control
- Antipattern for ultimate goal of making Ofy injectable
- Can't control cache use or batch loading without making ofy() explicit anyway
* Serialization behavior is surprising and could be quite dangerous/incorrect
- Can lead to serialization errors. If it actually worked "as intended",
it would lead to a Ref<> on a serialized object being replaced upon
deserialization with a stale copy of the old value, which could potentially
break all kinds of transactional expectations
* Having both Ref<T> and Key<T> introduces extra boilerplate everywhere
- E.g. helper methods all need to have Ref and Key overloads, or you need to
call .key() to get the Key<T> for every Ref<T> you want to pass in
- Creating a Ref<T> is more cumbersome, since it doesn't have all the create()
overloads that Key<T> has, only create(Key<T>) and create(Entity) - no way to
create directly from kind+ID/name, raw Key, websafe key string, etc.
(Note that Refs are treated specially by Objectify's @Load method and Keys are not;
we don't use that feature, but it is the one advantage Refs have over Keys.)
The direct impetus for this change is that I am trying to audit our use of memcache,
and the implicit .get() calls to datastore were making that very hard.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=131965491
This is an internal-only feature that breaks the open source build.
CL created with:
dr-replace '(compatible_with.*)' '\1 # MOE:strip_line'
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=128852873
We want to support multiple versions of the fee extension, to allow new features while maintaining backward compatibility. This CL extends the framework and adds one new version, 0.11 (spec version 7), to the existing version 0.6 (spec version 3). A follow-on CL will add version 0.12 (spec version 8).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=127849044
The presubmits are warning that toUpperCase() and toLowerCase() are locale-specific, and advise using Ascii.toUpperCase() and Ascii.toLowerCase() as a local-invariant alternative.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=127583677
