Update InstallAOSP-15.10.md
This commit is contained in:
Robert Wolff
GitHub
parent
56ed1b1b89
commit
70819e7da5
1 changed files with 87 additions and 0 deletions
|
|
@ -1 +1,88 @@
|
|||
h2. Install Instructions - CE AOSP RPB 15.10 - HiKey
|
||||
|
||||
This guide describes how to get started with the CE AOSP Reference Platform Build, release 15.10, for HiKey.
|
||||
|
||||
For more information about the HiKey development board, please check "https://www.96boards.org/products/ce/hikey/":https://www.96boards.org/products/ce/hikey/
|
||||
|
||||
h3. Image Components
|
||||
|
||||
The CE AOSP RPB 15.10 - HiKey build is composed of the following artifacts:
|
||||
|
||||
* Bootloader:
|
||||
** ARM Trusted Firmware, EDK2/UEFI and Grub2
|
||||
** For more information about the reference bootloader used by HiKey, please check "Reference-Bootloader-Hikey":https://github.com/96boards/documentation/wiki/Reference-Bootloader-Hikey
|
||||
** Pre-built files: "http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/bootloader":http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/bootloader
|
||||
* Linux Kernel:
|
||||
** Derived from Linux 3.18 kernel
|
||||
** Git: "https://github.com/96boards/linux.git":https://github.com/96boards/linux.git
|
||||
** Branch: *hikey*
|
||||
* AOSP Android Marshmallow 6.0
|
||||
|
||||
h4. Closed source binaries
|
||||
|
||||
The following components requires a closed source binary for better hardware support:
|
||||
|
||||
* TI wlan firmware (@wl18xx@)
|
||||
** Git: "http://git.ti.com/wilink8-wlan/wl18xx_fw":http://git.ti.com/wilink8-wlan/wl18xx_fw
|
||||
** Branch: *R8.5*
|
||||
* Extra firmware files available from firmware-linux
|
||||
* Mali (requires EULA)
|
||||
|
||||
h3. Downloading the pre-built binaries
|
||||
|
||||
The build is composed by the traditional Android image files (@boot@, @cache@, @system@ and @userdata@), but to avoid incompatibilities issues with older bootloaders, or different partition tables, it's also recommended to flash the bootloader.
|
||||
|
||||
*Bootloader files:*
|
||||
|
||||
bc. wget http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/bootloader/l-loader.bin
|
||||
wget http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/bootloader/fip.bin
|
||||
wget http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/bootloader/ptable-aosp.img
|
||||
wget http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/bootloader/hisi-idt.py
|
||||
|
||||
*CE AOSP RPB image:*
|
||||
|
||||
bc. wget http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/boot_fat.uefi.img.tar.xz
|
||||
wget http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/cache.img.tar.xz
|
||||
wget http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/userdata.img.tar.xz
|
||||
|
||||
Since @system.img@ requires the user to accept an End User License Agreement covering the rights to download and use the proprietary Mali userspace driver, it needs to be manually downloaded via browser. Please go to "http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/system.img.tar.xz":http://builds.96boards.org/releases/reference-platform/aosp/hikey/15.10/system.img.tar.xz and follow the instructions to download the file.
|
||||
|
||||
Uncompress the .tar.xz files using your operating system file manager, or with the following command, for each file:
|
||||
|
||||
bc. xz --decompress [filename].tar.xz; tar -xvf [filename].tar
|
||||
|
||||
h3. Flashing
|
||||
|
||||
h4. Bootloader
|
||||
|
||||
To flash the bootloader the recovery mode is required. For more information about the recovery mode, how to enable and use, please go to "https://github.com/96boards/documentation/wiki/Reference-Bootloader-Hikey#enabling-recovery-mode":https://github.com/96boards/documentation/wiki/Reference-Bootloader-Hikey#enabling-recovery-mode
|
||||
|
||||
On recovery mode, flash the bootloader with the following command:
|
||||
|
||||
bc. sudo python hisi-idt.py --img1=l-loader.bin -d /dev/ttyUSB0
|
||||
sudo fastboot flash ptable ptable-aosp.img
|
||||
sudo fastboot flash fastboot fip.bin
|
||||
|
||||
Change @ttyUSB0@ to the right interface name that gets exported to your host system.
|
||||
|
||||
Make sure to reboot the board after updating the partition table (@ptable-aosp.img@), otherwise flashing the system image might fail.
|
||||
|
||||
h4. Boot, System, Cache and Userdata
|
||||
|
||||
Fastboot is required to flash boot, system, cache and userdata.
|
||||
|
||||
Due bug "117 (UEFI fastboot uploads hangs for large images)":https://bugs.96boards.org/show_bug.cgi?id=117, it's recommended to flash the images via recovery mode (after running @hisi-idt.py@).
|
||||
|
||||
*Flashing boot, cache, system and userdata:*
|
||||
|
||||
bc. sudo fastboot flash boot boot_fat.uefi.img
|
||||
sudo fastboot flash cache cache.img
|
||||
sudo fastboot flash system system.img
|
||||
sudo fastboot flash userdata userdata.img
|
||||
|
||||
Once flashed, make sure recovery mode is not enabled (pin3-pin4 on J15), then just reboot the board and enjoy :-)
|
||||
|
||||
h3. Additional resources
|
||||
|
||||
For known issues and more information about this release, please check "https://github.com/96boards/documentation/wiki/ReferenceSoftware":https://github.com/96boards/documentation/wiki/ReferencePlatform
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue