diff --git a/Reference-Platform/PreviousReleases/RPB_16.03/ConsumerEdition/DragonBoard-410c/InstallDebianRPB-16.03.md b/Reference-Platform/PreviousReleases/RPB_16.03/ConsumerEdition/DragonBoard-410c/InstallDebianRPB-16.03.md
index a98e9ee..56b81fd 100644
--- a/Reference-Platform/PreviousReleases/RPB_16.03/ConsumerEdition/DragonBoard-410c/InstallDebianRPB-16.03.md
+++ b/Reference-Platform/PreviousReleases/RPB_16.03/ConsumerEdition/DragonBoard-410c/InstallDebianRPB-16.03.md
@@ -32,6 +32,122 @@ This method requires the following hardware:
 >Note the location of all downloads, they will be needed once you access your instruction set
 
 ***
-#### Step 4: Choose your host computer to access your instruction set
+#### Step 4:  Install Debian Using Fastboot with Linux host
 
-- [Linux](InstallDebianRPB-16.03.md)
+This section show how to install the Linaro based Debian operating system to your DragonBoard™ 410c using the fastboot method on a Linux host computer.
+
+1 - **Make sure fastboot is set up on host computer**
+
+- Android SDK “Tools only” for Linux can be downloaded <a href="http://developer.android.com/sdk" target="_blank">here</a>
+- The Linux “Tools Only” SDK download does not come with fastboot, you will need to use the Android SDK Manager to install platform-tools.
+- To do this follow the “SDK Readme.txt” instructions included in your SDK “Tools Only” download.
+
+If you are still having trouble setting up fastboot, <a href="https://youtu.be/W_zlydVBftA" target="_blank">click here</a> for a short tutorial video
+
+2 - **Connect host computer to DragonBoard™ 410c**
+
+- DragonBoard™ 410c must be powered off (unplugged from power)
+- Make sure microSD card slot on DragonBoard™ 410c is empty
+- S6 switch on DragonBoard™ 410c must be set to ‘0-0-0-0’. All switches should be in “off” position
+- Connect USB to microUSB cable from host computer to DragonBoard™ 410c
+
+3 - **Boot DragonBoard™ 410c into fastboot mode**
+
+**Please read all bullet points before attempting**
+
+- Press and hold the Vol (-) button on the DragonBoard™ 410c, this is the S4 button. DragonBoard™ 410c should still NOT be powered on
+- While holding the Vol (-) button, power on the DragonBoard™ 410c by plugging it in
+- Once DragonBoard™ 410c is plugged into power, release your hold on the Vol (-) button.
+- Wait for about 20 seconds.
+- Board should boot into fastboot mode.
+
+From the connected host machine terminal window, run the following commands:
+
+```shell
+# Check to make sure device is connected and in fastboot mode
+
+$ fastboot devices
+```
+
+Typically it will show as bellow
+```shell
+de82318	fastboot
+```
+
+**At this point you should be connected to your DragonBoard™ 410c with a USB to microUSB cable. Your DragonBoard™ 410c should be booted into fastboot mode and ready to be flashed with the appropriate images.**
+
+4 - **Flash Bootloader**
+
+- Use host computer
+- Open "Terminal" application
+- Recall location of Bootloader download.
+- The bootloader file should be named `dragonboard410c_bootloader_emmc_linux-XX`
+- XX represents the release number of the Bootloader
+- `cd` to the directory with your unzipped **Bootloader Folder**
+
+```shell
+$ cd <extraction directory>
+
+#Example: 
+cd /Users/YourUserName/Downloads
+#<extraction directory> = /Users/YourUserName/Downloads
+#For this example we assume the "Bootloader" is in the Downloads folder.
+
+
+$ cd <unzipped Bootloader folder>
+
+#Example:
+cd dragonboard410c_bootloader_emmc_linux-40
+#<unzipped Bootloader folder> = dragonboard410c_bootloader_emmc_linux-40
+#This example took place during release 40
+
+# This command will execute the flashall script within the bootloader folder
+$ ./flashall
+
+```
+
+5 - **Recall location of `boot` and `rootfs` download from the downloads page**
+
+- You should have downloaded the `boot` file
+- You should have downloaded ONE of rootfs` file (Either `Developer` or `Desktop - ALIP` version)
+
+6 - **Unzip both 'boot' and 'rootfs' files**
+
+7 - **Flash `boot` image and `rootfs` to the DragonBoard™ 410c**
+
+- Use host computer
+- Use "Terminal" application
+- Recall location of extracted(unzipped) `boot` file
+- Recall location of extracted(unzipped) `rootfs` file (`Developer` or `Desktop - ALIP`)
+- `cd` to the directory with your unzipped `boot` and `rootfs` files
+- From within extraction directory, execute the following commands:
+
+```shell
+# (Once again) Check to make sure fastboot device connected
+$ sudo fastboot devices
+# It will show similar to bellow if the device is connected successfully
+de82318	fastboot
+
+# cd to the directory the boot image and  were extracted
+$ cd <extraction directory>
+
+# Make sure you have properly unzipped the boot and rootfs downloads
+$ sudo fastboot flash boot boot-linaro-jessie-qcom-snapdragon-arm64-**BUILD#**.img
+$ sudo fastboot flash rootfs linaro-jessie-developer-qcom-snapdragon-arm64-**BUILD#**.img
+```
+**Note**: Replace **BUILD#** in the above commands with the file-specific date/build stamp.
+
+8 - **Reboot DragonBoard™ 410c**
+
+- Unplug power to DragonBoard™ 410c
+- Unplug micro USB cable from DragonBoard™ 410c
+- Ensure HDMI connection to monitor
+- Ensure keyboard and/or mouse connection (Depending on your rootfs selection)
+- Plug power back into DragonBoard™ 410c
+- Wait for board to boot up
+- Board will boot into either command line or desktop depending on rootfs
+
+**Note:** the **username** and **password** are both **“linaro”** when the login information is requested.
+
+**Congratulations! You are now booting your newly installed OS directly
+from eMMC on the DragonBoard™ 410c!**