Partial Migration of RPB CE and EE wiki pages.
Signed-off-by: Robert Wolff <robert.wolff@linaro.org>
This commit is contained in:
Robert Wolff
parent
cc464c98ca
commit
25eae6fe03
26 changed files with 3302 additions and 45 deletions
46
Reference-Platform/ConsumerEdition/HiKey/BFSAOSPRPB-16.03.md
Normal file
46
Reference-Platform/ConsumerEdition/HiKey/BFSAOSPRPB-16.03.md
Normal file
|
|
@ -0,0 +1,46 @@
|
|||
## AOSP RPB 16.03 - Build from Source
|
||||
|
||||
Additional AOSP repositories are hosted here:
|
||||
- https://github.com/96boards/android_hardware_ti_wpan
|
||||
- https://github.com/96boards/android_device_linaro_hikey
|
||||
- https://github.com/96boards/android_manifest
|
||||
- https://github.com/96boards/linux (branch android-hikey-linaro-4.1)
|
||||
|
||||
**Build setup:**
|
||||
|
||||
Please setup the host machine by following the instructions here: [http://source.android.com/source/initializing.html](http://source.android.com/source/initializing.html)
|
||||
|
||||
###### Out of date:
|
||||
NOTE: The build tries to mount a loop device as fat partition to create the boot-fat.uefi.img filesystem image. Please make sure your user is allowed to run those commands in sudo without password by running "visudo" and appending the following lines (replacing "<USER>" with your username):
|
||||
|
||||
```shell
|
||||
<USER> ALL= NOPASSWD: /bin/mount
|
||||
<USER> ALL= NOPASSWD: /bin/umount
|
||||
<USER> ALL= NOPASSWD: /sbin/mkfs.fat
|
||||
<USER> ALL= NOPASSWD: /bin/cp
|
||||
```
|
||||
|
||||
***
|
||||
|
||||
**Download the code:**
|
||||
|
||||
```shell
|
||||
mkdir android/
|
||||
cd android/
|
||||
```
|
||||
|
||||
Download and extract the Mali vendor binaries in the above directory: http://builds.96boards.org/snapshots/hikey/linaro/binaries/20150706/vendor.tar.bz2
|
||||
|
||||
**Build the image:**
|
||||
|
||||
```shell
|
||||
repo init -u https://android.googlesource.com/platform/manifest -b android-6.0.1_r16 -g "default,-device,-non-default,hikey"
|
||||
cd .repo/
|
||||
git clone https://github.com/96boards/android_manifest -b android-6.0 local_manifests
|
||||
cd -
|
||||
repo sync -j8
|
||||
source build/envsetup.sh
|
||||
lunch hikey-userdebug
|
||||
make droidcore -j8
|
||||
cd out/target/product/hiked
|
||||
```
|
||||
185
Reference-Platform/ConsumerEdition/HiKey/BFSDebianRPB-16.03.md
Normal file
185
Reference-Platform/ConsumerEdition/HiKey/BFSDebianRPB-16.03.md
Normal file
|
|
@ -0,0 +1,185 @@
|
|||
## Debian RPB 16.03 - Build from Source
|
||||
|
||||
- Building Linux Kernel from Source
|
||||
- Step 1: Setting up your environment on your host computer
|
||||
- Step 2: Download the Linaro cross compiler toolchain
|
||||
- Step 3: Export path to cross compiler tool and confirm version
|
||||
- Step 5: Set the right kernel .config file
|
||||
- Step 6: Build kernel image and debian package
|
||||
- Step 7: Copy Modules
|
||||
- Step 8: Find kernel release string
|
||||
- Step 9: Generate modules.dep and map files
|
||||
- Step 10: Find DragonBoard™ 410c IP Address
|
||||
- Step 11: Transfer the modules to the target HiKey
|
||||
- Step 12: Generate the initramfs
|
||||
- Step 13: Create the device tree image and boot image
|
||||
- Customize Bootloader
|
||||
- Build Rootfs from source
|
||||
|
||||
***
|
||||
|
||||
#### Building the Linux kernel from source
|
||||
|
||||
The Linux kernel used in this release is available via tags in the git [repository](https://github.com/96boards/linux)
|
||||
|
||||
```shell
|
||||
git: https://github.com/96boards/linux
|
||||
Dynamic tag: 96b-kernelci
|
||||
Fixed tag: 96b/releases/2016.03
|
||||
defconfig: arch/arm64/configs/distro.config
|
||||
```
|
||||
|
||||
The kernel image (`Image`) and the kernel modules are installed in the root file system (e.g. `/boot/vmlinuz-4.4.0-104-arm64` and `/lib/modules/4.4.0-104-arm64`). It is possible for a user to rebuild the kernel and run a custom kernel image instead of the released kernel. You can build the kernel using any recent GCC release using the git tree, tag and defconfig mentioned above. This release only supports booting with device tree, as such both the device tree blobs need to be built as well.
|
||||
|
||||
The HiKey is an ARMv8 platform, and the kernel is compiled for the Aarch64 target. Even though it is possible to build natively, on the target board, It is recommended to build the Linux kernel on a PC development host. In which case you need to install a cross compiler for the ARM architecture. It is recommended to download the Linaro GCC cross compiler [Aarch64 little-endian](http://releases.linaro.org/components/toolchain/binaries/5.3-2016.02/aarch64-linux-gnu/gcc-linaro-5.3-2016.02-x86_64_aarch64-linux-gnu.tar.xz), also available [here](http://releases.linaro.org/components/toolchain/binaries/5.3-2016.02/)
|
||||
|
||||
To build the Linux kernel, you can use the following instructions:
|
||||
|
||||
#### Step 1: Setting up your environment on your host computer
|
||||
|
||||
- Open your Terminal and cd into your desired directory
|
||||
- Make a new folder using `mkdir`, name it something relevant
|
||||
|
||||
```shell
|
||||
#Example of desired directory
|
||||
$ cd ~/Desktop
|
||||
|
||||
#Example of relevant folder
|
||||
$ mkdir HiKey-16.03
|
||||
$ cd HiKey-16.03
|
||||
```
|
||||
|
||||
#### Step 2: Step 2: Download the Linaro cross compiler toolchain
|
||||
|
||||
- From within the directory you just made
|
||||
- Download and unzip by executing the following commands
|
||||
|
||||
###### Linaro Cross Compiler
|
||||
|
||||
```shell
|
||||
#Download
|
||||
$ wget http://releases.linaro.org/components/toolchain/binaries/5.3-2016.02/aarch64-linux-gnu/gcc-linaro-5.3-2016.02-x86_64_aarch64-linux-gnu.tar.xz
|
||||
#Unzip
|
||||
$ tar -Jxvf gcc-linaro-5.3-2016.02-x86_64_aarch64-linux-gnu.tar.xz
|
||||
```
|
||||
|
||||
#### Step 3: Export path to cross compiler tool and confirm version
|
||||
|
||||
- Exporting path will allow build system can find and use the right kernel
|
||||
|
||||
```shell
|
||||
#Create path
|
||||
$ export PATH=~/Desktop/HiKey-16.03/gcc-linaro-5.3-2016.02-x86_64_aarch64-linux-gnu/bin/:$PATH
|
||||
#Check version
|
||||
$ aarch64-linux-gnu-gcc --version
|
||||
aarch64-linux-gnu-gcc (Linaro GCC 5.3-2016.02) 5.3.1 20160113
|
||||
Copyright (C) 2015 Free Software Foundation, Inc.
|
||||
This is free software; see the source for copying conditions. There is NO
|
||||
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
```
|
||||
|
||||
#### Step 4: Clone the Reference Platform kernel
|
||||
|
||||
- **96b-kernelci** is the development branch
|
||||
- This branch will have the latest changes
|
||||
- Use **96b/releases/2016.03** if you want the same version used by the 16.03 release
|
||||
|
||||
```shell
|
||||
$ git clone -b 96b/releases/2016.03 http://github.com/96boards/linux.git
|
||||
```
|
||||
|
||||
- Cloning the kernel may take a few minutes
|
||||
- If you already have a local clone of another kernel git tree, use _--reference path/your/old/tree/.git_ for a faster clone process
|
||||
- Once kernel source has been cloned cd into its directory
|
||||
|
||||
```shell
|
||||
$ cd linux
|
||||
```
|
||||
|
||||
#### Step 5: Set the right kernel .config file
|
||||
|
||||
- This step creates the '.config' file
|
||||
- The .config file is used by the build system when compiling the kernel
|
||||
- Current Reference Platform config can be made by using distro.config
|
||||
- From with in kernel directory execute the following command:
|
||||
|
||||
```shell
|
||||
$ cp arch/arm64/configs/distro.config .config
|
||||
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- oldconfig
|
||||
```
|
||||
|
||||
- New .config file will be hidden but can be seen by executing `ls -a` from within kernel folder
|
||||
- To view all current configuration the .config file can be opened with a text editor such a `vim`
|
||||
|
||||
#### Step 6: Build kernel image and debian package
|
||||
|
||||
- This step will take some time (~20-30 minutes or more), depending on your cpu/memory
|
||||
- Creating the kernel package is recommended for HiKey, as it supports Grub 2
|
||||
|
||||
```shell
|
||||
#Replace X from -jX with the number of cores on your host computer
|
||||
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -jX deb-pkg LOCALVERSION=-yourowntag
|
||||
```
|
||||
|
||||
#### Step 7: Find HiKey IP Address
|
||||
|
||||
- On your HiKey board
|
||||
- Connect to the internet through WIFI
|
||||
- Open one of the Terminal applications
|
||||
|
||||
```shell
|
||||
$ /sbin/ifconfig
|
||||
```
|
||||
- Look for your `wlan0` connection
|
||||
- Here you will see an `inet addr`
|
||||
- This is your board's IP address and should look something like this: `192.168.0.10`
|
||||
|
||||
#### Step 8: Transfer the modules to the target HiKey
|
||||
|
||||
- Using your board's IP Address for linaro@<yourIPaddress>
|
||||
|
||||
```shell
|
||||
$ scp ../linux-image-4.4.0-yourowntag.deb linaro@192.168.1.15:~/
|
||||
$ ssh linaro@192.168.1.15
|
||||
#HiKey shell
|
||||
|
||||
$ hikey $ sudo dpkg -i linux-image-4.4.0-yourowntag.deb
|
||||
```
|
||||
Congratulations! Your new kernel is now ready to be used by your HiKey.
|
||||
|
||||
- You can check `/boot/grub/grub.cfg` for the new boot entry based on your own kernel
|
||||
- If you want only your kernel to be available, you can remove the default linux-image package, and grub will be automatically updated
|
||||
|
||||
### Boot Loader
|
||||
|
||||
Please see [https://github.com/linaro/documentation/wiki/Reference-Platform-Bootloader-Hikey#building-from-source](https://github.com/linaro/documentation/wiki/Reference-Platform-Bootloader-Hikey#building-from-source) for instructions on how to built the boot loader from source.
|
||||
|
||||
#### How to get and customize Debian packages source code
|
||||
|
||||
This release is based on Debian 8.2 "Jessie".
|
||||
|
||||
Since all packages installed in Linaro Debian-based images are maintained either in Debian archives or in Linaro repositories, it is possible for users to update their environment with commands such as:
|
||||
|
||||
```shell
|
||||
sudo apt-get update
|
||||
sudo apt-get upgrade
|
||||
```
|
||||
|
||||
All user space software is packaged using Debian packaging process. As such you can find extensive information about using, patching and building packages in The Debian New Maintainers Guide. If you quickly want to rebuild any package, you can run the following commands to fetch the package source code and install all build dependencies:
|
||||
|
||||
```shell
|
||||
sudo apt-get update
|
||||
sudo apt-get build-dep <pkg>
|
||||
apt-get source <pkg>
|
||||
```
|
||||
|
||||
Then you can rebuild the package locally with:
|
||||
|
||||
```shell
|
||||
cd <pkg-version>
|
||||
dpkg-buildpackage -b -us -uc
|
||||
```
|
||||
|
||||
#### TODO
|
||||
|
||||
* Explain how to build the rootfs from source
|
||||
126
Reference-Platform/ConsumerEdition/HiKey/InstallAOSPRPB-16.03.md
Normal file
126
Reference-Platform/ConsumerEdition/HiKey/InstallAOSPRPB-16.03.md
Normal file
|
|
@ -0,0 +1,126 @@
|
|||
#### Your Build Choice
|
||||
|
||||
[<img src="http://i.imgur.com/jl4GG0d.png" data-canonical-src="http://i.imgur.com/jl4GG0d.png" width="125" height="157" />]()
|
||||
[<img src="http://i.imgur.com/yRQKDI6.png" data-canonical-src="http://i.imgur.com/yRQKDI6.png" width="125" height="157" />]()
|
||||
[<img src="http://i.imgur.com/7wy1996.png" data-canonical-src="http://i.imgur.com/7wy1996.png" width="125" height="157" />]()
|
||||
[<img src="http://i.imgur.com/yRQKDI6.png" data-canonical-src="http://i.imgur.com/yRQKDI6.png" width="125" height="157" />]()
|
||||
[<img src="http://i.imgur.com/tXXN5bZ.png" data-canonical-src="http://i.imgur.com/tXXN5bZ.png" width="125" height="157" />]()
|
||||
|
||||
***
|
||||
|
||||
#### Step 1: Read about the Fastboot Method
|
||||
|
||||
Fastboot is supported by the board and can be used for installs. This is for advanced users who are most likely modifying/customizing source code and will need to download such updates to the board for test/execution.
|
||||
|
||||
This method requires the following hardware:
|
||||
- HiKey with power supply
|
||||
- Host machine (Linux, Mac OS X, or Windows)
|
||||
- USB to microUSB cable
|
||||
- USB Mouse and/or keyboard (not required to perform flash)
|
||||
- HDMI Monitor with full size HDMI cable (not required to perform flash)
|
||||
|
||||
***
|
||||
|
||||
#### Step 2: Download the following files
|
||||
|
||||
>Note: Some files have 4G and 8G options, download file which best matches your HiKey board.
|
||||
|
||||
- All HiKey **CircuitCo boards** will use the **4G files**
|
||||
- All HiKey **LeMaker 1G boards** will use the **4G files**
|
||||
- All HiKey **LeMaker 2G boards** will use the **8G files**
|
||||
|
||||
Build Folders (<a href="http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/bootloader/" target="_blank">**Binaries**</a> / <a href="http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/" target="_blank">**Image**</a>)
|
||||
|
||||
- **l-loader.bin** ([**Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/bootloader/l-loader.bin))
|
||||
- **fip.bin** ([**Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/bootloader/fip.bin))
|
||||
- **nvme.img** ([**Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/bootloader/nvme.img))
|
||||
- **ptable-aosp.img** ([**4G Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/bootloader/ptable-aosp-4g.img) / [**8G Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/bootloader/ptable-aosp-8g.img))
|
||||
- **hisi-idt.py** ([**Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/bootloader/hisi-idt.py))
|
||||
- **boot_fat.uefi.img** ([**Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/boot_fat.uefi.img.tar.xz))
|
||||
- **cache.img.tar.xz** ([**Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/cache.img.tar.xz))
|
||||
- **userdata.img.xz** ([**4G Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/userdata.img.tar.xz) / [**8G Download**](http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/userdata-8gb.img.tar.xz))
|
||||
- **system.img.tar.xz** (<a href="http://builds.96boards.org/releases/reference-platform/aosp/hikey/16.03/system.img.tar.xz" target="_blank">**Download**</a>)
|
||||
|
||||
***
|
||||
|
||||
#### Step 3: Install AOSP Using Fastboot with Linux host
|
||||
|
||||
This section show how to install the AOSP operating system to your HiKey using the fastboot method on a Linux host computer.
|
||||
|
||||
1 - **Make sure fastboot is set up on host computer**
|
||||
|
||||
- Android SDK “Tools only” for Linux can be downloaded <a href="http://developer.android.com/sdk" target="_blank">here</a>
|
||||
- The Linux “Tools Only” SDK download does not come with fastboot, you will need to use the Android SDK Manager to install platform-tools.
|
||||
- To do this follow the “SDK Readme.txt” instructions included in your SDK “Tools Only” download.
|
||||
|
||||
If you are still having trouble setting up fastboot, <a href="https://youtu.be/W_zlydVBftA" target="_blank">click here</a> for a short tutorial video
|
||||
|
||||
2 - **Boot HiKey into Fastboot mode using J15 header**
|
||||
|
||||
- Link pins 1 and 2
|
||||
- Link pins 5 and 6
|
||||
- Connect host computer to HiKey board using USB to microUSB cable
|
||||
|
||||
Name | Link | State
|
||||
---- | ---- | -----
|
||||
Auto Power up | Link 1-2 | closed
|
||||
Boot Select | Link 3-4 | open
|
||||
GPIO3-1 | Link 5-6 | closed
|
||||
|
||||
- Power on HiKey board by plugging in power adapter
|
||||
- Esure HiKey is detected by host computere
|
||||
- Open Terminal application and execute the following:
|
||||
|
||||
```shell
|
||||
$ sudo fastboot devices
|
||||
0123456789abcdef fastboot
|
||||
```
|
||||
|
||||
>Note: If your HiKey is not being detected by fastboot, you might want to try [Board Recovery](https://github.com/96boards/documentation/wiki/HiKey-Board-Recovery) and return to this step once your board is ready
|
||||
|
||||
3 - **Set HiKey into Recovery Mode using J15 header**
|
||||
|
||||
- Remove link between pins 5 and 6
|
||||
- Link pins 1 and 2
|
||||
- Link pins 3 and 4
|
||||
|
||||
Name | Link | State
|
||||
---- | ---- | -----
|
||||
Auto Power up | Link 1-2 | closed
|
||||
Boot Select | Link 3-4 | closed
|
||||
GPIO3-1 | Link 5-6 | open
|
||||
|
||||
4 - **Install Operating System update using downloaded files**
|
||||
|
||||
>**NOTE:** the ptable must be flashed first. Wait for a few seconds after the reboot command to allow the bootloader to restart using the new partition table.
|
||||
|
||||
```shell
|
||||
$ sudo fastboot flash ptable ptable-aosp-8g.img
|
||||
$ sudo fastboot reboot
|
||||
$ sudo fastboot flash boot boot_fat.uefi.img
|
||||
$ sudo fastboot flash cache cache.img
|
||||
$ sudo fastboot flash system system.img
|
||||
$ sudo fastboot flash userdata userdata-8gb.img
|
||||
```
|
||||
|
||||
5 - **Reboot HiKey into new OS**
|
||||
|
||||
- Wait untill all files have been flashed onto HiKey board
|
||||
- Power down HiKey by unplugging the power adapter
|
||||
- Remove microUSB cable from HiKey
|
||||
- Remove Link 3-4 from J15 header
|
||||
|
||||
Name | Link | State
|
||||
---- | ---- | -----
|
||||
Auto Power up | Link 1-2 | closed
|
||||
Boot Select | Link 3-4 | open
|
||||
GPIO3-1 | Link 5-6 | open
|
||||
|
||||
- Plug mouse/keyboard USB into type A USB ports
|
||||
- Power up HiKey by plugging in power adapter
|
||||
|
||||
|
||||
**Note:** the **username** and **password** are both **“linaro”** when the login information is requested.
|
||||
|
||||
**Congratulations! You are now booting your newly installed OS directly
|
||||
from eMMC on the HiKey!**
|
||||
|
|
@ -0,0 +1,111 @@
|
|||
<img src="http://i.imgur.com/jl4GG0d.png" data-canonical-src="http://i.imgur.com/jl4GG0d.png" width="125" height="157" />
|
||||
<img src="http://i.imgur.com/yRQKDI6.png" data-canonical-src="http://i.imgur.com/yRQKDI6.png" width="125" height="157" />
|
||||
<img src="http://i.imgur.com/OQGR5yY.png" data-canonical-src="http://i.imgur.com/OQGR5yY.png" width="125" height="157" />
|
||||
<img src="http://i.imgur.com/yRQKDI6.png" data-canonical-src="http://i.imgur.com/yRQKDI6.png" width="125" height="157" />
|
||||
<img src="http://i.imgur.com/tXXN5bZ.png" data-canonical-src="http://i.imgur.com/tXXN5bZ.png" width="125" height="157" />
|
||||
|
||||
***
|
||||
|
||||
#### Step 1: Read about the Fastboot Method
|
||||
|
||||
Fastboot is supported by the board and can be used for installs. This is for advanced users who are most likely modifying/customizing source code and will need to download such updates to the board for test/execution.
|
||||
|
||||
This method requires the following hardware:
|
||||
- HiKey with power supply
|
||||
- Host machine (Linux, Mac OS X, or Windows)
|
||||
- USB to microUSB cable
|
||||
- USB Mouse and/or keyboard (not required to perform flash)
|
||||
- HDMI Monitor with full size HDMI cable (not required to perform flash)
|
||||
|
||||
***
|
||||
|
||||
#### Step 2: Download Debian partition table
|
||||
|
||||
> Note: Some files have 4G and 8G options, download file which best matches your HiKey board.
|
||||
|
||||
- All HiKey **CircuitCo boards** will use the **4G files**
|
||||
- All HiKey **LeMaker 1G boards** will use the **4G files**
|
||||
- All HiKey **LeMaker 2G boards** will use the **8G files**
|
||||
|
||||
**ptable-linux.img** ([**4G Download**](https://builds.96boards.org/releases/reference-platform/debian/hikey/16.03/bootloader/ptable-linux-4g.img) / [**8G Download**](https://builds.96boards.org/releases/reference-platform/debian/hikey/16.03/bootloader/ptable-linux-8g.img))
|
||||
|
||||
***
|
||||
|
||||
#### Step 3: Download Boot image and Root File System
|
||||
|
||||
- **Debian Boot** ([**Download**](https://builds.96boards.org/releases/reference-platform/debian/hikey/16.03/hikey-boot-linux-*.uefi.img.gz))
|
||||
- **Debian Rootfs** (<a href="https://builds.96boards.org/releases/reference-platform/debian/hikey/16.03/hikey-rootfs-debian-jessie-alip-*.emmc.img.gz" target="_blank">**Download**</a>)
|
||||
|
||||
|
||||
***
|
||||
|
||||
#### Step 4: Install Debian Using Fastboot with Linux host
|
||||
|
||||
This section show how to install the Linaro based Debian operating system to your HiKey using the fastboot method on a Linux host computer.
|
||||
|
||||
|
||||
|
||||
1 - **Make sure fastboot is set up on host computer**
|
||||
|
||||
- Android SDK “Tools only” for Linux can be downloaded <a href="http://developer.android.com/sdk" target="_blank">here</a>
|
||||
- The Linux “Tools Only” SDK download does not come with fastboot, you will need to use the Android SDK Manager to install platform-tools.
|
||||
- To do this follow the “SDK Readme.txt” instructions included in your SDK “Tools Only” download.
|
||||
|
||||
If you are still having trouble setting up fastboot, <a href="https://youtu.be/W_zlydVBftA" target="_blank">click here</a> for a short tutorial video
|
||||
|
||||
2 - **Boot HiKey into Fastboot mode using J15 header**
|
||||
|
||||
- Link pins 1 and 2
|
||||
- Link pins 5 and 6
|
||||
- Connect host computer to HiKey board using USB to microUSB cable
|
||||
|
||||
Name | Link | State
|
||||
---- | ---- | -----
|
||||
Auto Power up | Link 1-2 | closed
|
||||
Boot Select | Link 3-4 | open
|
||||
GPIO3-1 | Link 5-6 | closed
|
||||
|
||||
- Power on HiKey board by plugging in power adapter
|
||||
- Esure HiKey is detected by host computere
|
||||
- Wait for about 10 seconds
|
||||
- Open Terminal application and execute the following:
|
||||
|
||||
```shell
|
||||
$ sudo fastboot devices
|
||||
0123456789abcdef fastboot
|
||||
```
|
||||
|
||||
>Note: If your HiKey is not being detected by fastboot, you might want to try [Board Recovery](https://github.com/96boards/documentation/wiki/HiKey-Board-Recovery) and return to this step once your board is ready
|
||||
|
||||
3 - **Install Operating System update using downloaded files**
|
||||
|
||||
>**NOTE:** the ptable must be flashed first. Wait for a few seconds after the reboot command to allow the bootloader to restart using the new partition table.
|
||||
|
||||
```shell
|
||||
$ sudo fastboot flash ptable <ptable_FILE_NAME>.img
|
||||
$ sudo fastboot reboot
|
||||
$ sudo fastboot flash boot <boot_FILE_NAME>.uefi.img
|
||||
$ sudo fastboot flash system hikey-jessie_alip_2015MMDD-nnn-Xg.emmc.img
|
||||
```
|
||||
|
||||
4 - **Reboot HiKey into new OS**
|
||||
|
||||
- Wait untill all files have been flashed onto HiKey board
|
||||
- Power down HiKey by unplugging the power adapter
|
||||
- Remove microUSB cable from HiKey
|
||||
- Remove Link 5-6 from J15 header
|
||||
|
||||
Name | Link | State
|
||||
---- | ---- | -----
|
||||
Auto Power up | Link 1-2 | closed
|
||||
Boot Select | Link 3-4 | open
|
||||
GPIO3-1 | Link 5-6 | open
|
||||
|
||||
- Plug mouse/keyboard USB into type A USB ports
|
||||
- Power up HiKey by plugging in power adapter
|
||||
|
||||
|
||||
**Note:** the **username** and **password** are both **“linaro”** when the login information is requested.
|
||||
|
||||
**Congratulations! You are now booting your newly installed OS directly
|
||||
from eMMC on the HiKey!**
|
||||
Loading…
Add table
Add a link
Reference in a new issue