From 18f8097b8745b6e5fe62c7be3c513ce16761b356 Mon Sep 17 00:00:00 2001 From: Ricardo Salveti de Araujo Date: Mon, 5 Dec 2016 10:36:39 +0000 Subject: [PATCH] Update UEFI-EDK2-Guide-EE.md --- Reference-Platform/EECommon/UEFI-EDK2-Guide-EE.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Reference-Platform/EECommon/UEFI-EDK2-Guide-EE.md b/Reference-Platform/EECommon/UEFI-EDK2-Guide-EE.md index bcb6166..d65fbe0 100644 --- a/Reference-Platform/EECommon/UEFI-EDK2-Guide-EE.md +++ b/Reference-Platform/EECommon/UEFI-EDK2-Guide-EE.md @@ -265,15 +265,15 @@ Flashing D03 requires the board to have a working ethernet connection to the FTP ##### Clean flash -To do a clean flash you will require access to the BMC. +To do a clean flash you will require access to the board's BMC. 1. Make sure the board's BMC port is connected, and with a known IP address. -2. Login the BMC website, The username/passwd is root/Huawei12#$. Click "system", "Firmware upgrade", "Browse" to select the UEFI file in hpm formate. (Please contact support@open-estuary.org to get the hpm file). +2. Login the BMC website, The username/passwd is root/Huawei12#$. Go to "System", "Firmware Upgrade", and "Browse" to select the UEFI file in hpm format. (Please contact support@open-estuary.org to get the hpm file). 3. Pull out the power cable to power off the board. Find the pin named "COM_SW" at J44. Then connect it with jump cap. -4. Power on the board, connect to the board's serial port. When the screen display message "You are trying to access a restricted zone. Only Authorized Users allowed.", type "Enter" key, input username/passwd, the username/passwd is root/Huawei12#$. -5. After you login the BMC interface which start with "iBMC:/->", use command "ifconfig" to see the modified BMC IP. When you get the board's BMC IP, please visit the BMC website by "https://" -6. Click "Start update" (Do not power off during this period). -7. After updated UFEI file, reboot the board to enter UEFI menu. +4. Power on the board and connect to the board's serial port. When the screen display message "You are trying to access a restricted zone. Only Authorized Users allowed.", type "Enter", input username/passwd (username/passwd is root/Huawei12#$). +5. After you login the BMC interface which start with "iBMC:/->", use command "ifconfig" to see the modified BMC IP. When you get the board's BMC IP, please visit the BMC website by "https://BMC IP ADDRESS/". +6. Go to "Start Update" (Do not power off during this period). +7. After updating the UEFI firmware, reboot the board to enter UEFI menu. ##### Upgrading firmware